It is certified as UL type4X (Outdoor) and can be used outdoors. However, it is recommended to check this beforehand, as performance may be degraded depending on the customer's operating environment.
Outdoor use is not covered by the product warranty.

The front of the panel of this product is made of weather-resistant material. However, excessive exposure to ultraviolet rays in direct sunlight, etc., may cause resin deterioration such as strength degradation and color fading.

The protective structure of this product has IP65/67 and UL type4X performance. 

This product employs a diffuse reflection method using infrared light as the light source for detection.

This product is equipped with an interference prevention function¹, making it less susceptible to adjacent touchless switch detection light.

However, depending on the size of the sensing element and installation conditions, adjacent touchless switches may detect it at the same time. Please refer to the installation examples and operating area diagrams in the catalog for installation conditions. The minimum mounting pitch is 30 mm (width) and 50 mm (height).

¹The interference prevention function is only available for two adjacent touchless switches.

The maximum detection distance can be adjusted from approximately 70 to 270 mm (reference value) when the detected object is a human hand.　

Black gloves can also be detected, but the detection distance tends to be shorter than that of human hands. The detection distance varies depending on the color, material, and surface condition of the detected object. See catalog for the detection distance range of each target.